|
|
 |
|
|
|
Charmec
Charmec 9910BC ANX - 1 Boom suitable for charging of explosives, lifting & installing works in tunnelling.
Dimensions - Length 11290mm, width 2400mm, height 2900mm & wheel base 3350mm. Ground clearance of 320mm with an outer turning radius of 7780mm & inner turning radius of 3530. Operating weight is 19500kg.
Normet Super boom NSB900 – A heavy duty multipurpose boom suitable for charging, scaling, spraying of concrete, bolting & installing works.
Boom lift -20deg to +53deg with boom slew of +/-30deg. Has a vertical working reach, max 11m & face 10m. The platform can slew 340deg with a platform size of 2.40m x 2.40m, (extended 2.40m x 4.70m ). Side extensions are hydraulically operated with a lifting capacity of 1000kg.
Charging equipment - 2 x 500L Anfo vessels: Each with independent pressure controls.
Compressor - Powered hydrostatically by Carrier diesel engine, Capacity 5 cum/min.
Carrier NC98 – Diesel engine @ 96 kW with a hydro-dynamic transmission and 4-wheel drive gives max. speed of 25km/h. Fully enclosed multidisc 2-circuitbrakes and parking and emergency brake make operating reliable and safe in harsh underground conditions.
|
|
|
|
____________________________________________________________________________________________________________________
|
|
|
|
Spraymec
Spraymec 9150WP - Sprayed concrete systems contribute to the high quality of sprayed concrete structures that maintain a long life.
Spray Pump - Double piston pump with output of 4-33m cube/h. Pumping cylinder with diameter 180. Pumping stroke of 630mm & a pressure of 65 bar.
Electric-Hydraulic power pack PPE550 - Operators concrete pump & booms, PPE550 @ 55kW/400v.
Normet Super boom NSB900 - Width of boom area @ 16m & Roof height of 15m can be covered by the heavy duty boom. Boom lift @ 53deg & boom slew of +/- 20deg with boom ext of 2400mm.
Spray Stand - operator nozzle can slew @ 340 deg. The platform has a load capacity of 500kg and automatic spray leveling.
Spray boom SB300 - Fitted to spray stand with automatic movements of nozzle rotation, telescopic stroke of 2200mm and Boom lift of -30deg to +60deg.
Cable Reel KKH35 - For power supply of electrically operated functions including 100m of cable.
Carrier NC98 - Diesel engine @ 96 kW with a hydro-dynamic transmission and 4-wheel drive gives max. speed of 25km/h. Fully enclosed multidisc 2-circuitbrakes and parking and emergency brake make operating reliable and safe in harsh underground conditions.
|
|
|
|
____________________________________________________________________________________________________________________
|
|
|
|
Himec
Himec 9915 BA - Self propelled diesel driven 1-boom lifter for man lifting and robotic steel support installing in tunnels.
Normet Super boom NSB920 - A heavy duty multipurpose boom suitable for charging, scaling, spraying of concrete, bolting & installing works. Boom lift from -20deg to +53deg & boom slew of +/- 30deg with boom extension of 2400mm.Boom is controlled by the platform & the boom carrier.
BA 15 Platform - Is specially designed for mechanized installation of steel support. Platform is equipped with full rotation and an automatic leveling system
Archlift - Telescopic manipulator for mechanized lifting & installing of steel supports carrying a max load of 1350kg and a max lifting reach of 11.1m.
Carrier NC98 - Diesel engine @ 96 kW with a hydro-dynamic transmission and 4-wheel drive giving max. speed of 25km/h. Fully enclosed multidisc 2-circuitbrakes and parking and emergency brake make operating reliable and safe in harsh underground conditions.
|
|
|
|
____________________________________________________________________________________________________________________
|
|
|
|
Scamec
Scamec 2000S - self propelled diesel driven unit for mechanized scaling in underground mining and tunnelling.
Dimensions - Length 12580mm, Height (STD) 2400mm, Width 2650mm & a Wheel base 3900mm with a outer turning radius of 6790mm & inner turning radius of 4050mm. Has a operating weight of 24200kg.
Normet Super boom NSB1000 - A heavy duty telescopic scaling boom with Max. vertical reach of hammer @ 8.4m & Max. horizontal reach of hammer @ 11.0m with a boom slew of +/- 40deg. The hammer can turn at +/- 45deg with a hammer tilt of 120deg.
Scaling tools - Hydraulic hammer as standard with impact energy of 450j and a weight of 315kg. Pick type scaling tool is optional.
Compressor - Hydraulically powered compressor for air flushing of hammers tool. It has a capacity of 0.4m3/min.
Carrier NC200 - Frame steered, 4 wheel driven carrier, powered by deutz BF4M 1013C, 112kW/2300 rpm. Power shift transmission, 3 speeds forward/rev with planetary drive type (Dana Spicer). Electric system runs on 24v. Has full fail-safe type brakes and a catalytic purifier exhaust.
|
|
|
|
____________________________________________________________________________________________________________________
|
|
|
|
Utilift
Utilift 6330X
Dimensions - Length 7850mm, Width 1800mm, Height 2300mm, Wheel base 3550mm, Track1500mm, Ground clearance of 280mm. An outer turning radius of 6200mm and an inner turning radius of 3950mm.
Weight - Operating @ 8000kg,
Crane - Lifting capacity of 25,2 kNm
Transmission - Dana Spicer powershift, 3 speeds forward & reverse with 4-wheel drive
Boom reach - lifting capacity of 4500 kg, at 1,5m = 1800 kg,at 3,5m = 780 kg, at 5,8m = 440 kg and a slewing angle 330deg.
Axles - Planetary type fixed rear axle. Front axle oscillation +/- 10deg.
Brakes - Service brake :Hydraulically powered, two-circuit oil immersed multidisk brakes in both axles.
Safety / Parking brake - Hydraulically released fail-safe-type brake.
Steering - Hydraulic frame steering, Orbital type frame articulation +/- 40deg
Hydraulics - 190 bar, 95 l/min/2200 rpm for steering and brakes.
Engine - Deutz TCD 2012 L4 - 96 kW/2200 rpm
|
|
|
|
____________________________________________________________________________________________________________________
|
|
|
|
Utimec
Utimec Transmixer 1500
Dimensions - length 9100mm, Width 2000mm, Height 2330mm, Wheel base 3650mm, Track 1650mm.
Weight - Operating @ 11800kg.
Transmission - Dana Spicer powershift, 3 speeds forward & reverse with 4-wheel drive
Mixer - Drum volume (100%full) 5.5m cubed. Equipped with a hydraulically controlled mixing and unloading adjustable drum lifter (rotation speed of 0 – 13 rpm).
Axles - Planetary type fixed rear axle. Front axle oscillation +/- 10deg.
Brakes - Service brake :Hydraulically powered, two-circuit oil immersed multidisk brakes in both axles.
Safety / Parking brake - Hydraulically released fail-safe-type brake.
Steering - Hydraulic frame steering, Orbital type frame articulation +/- 40deg
Hydraulics - 190 bars, 100 l/min/2200rpm for steering & brakes 200bar, 105l/min/2200rpm for mixer.
Engine - Deutz TCD 2013L4 - 120kW/2300rpm.
|
|
|
|
____________________________________________________________________________________________________________________
|
|
|
|
Multimec
Multimec 6600
Dimensions - length 7730, Width 1800mm, Height 2150mm, Wheel base 3550mm, Track 1500mm.
Weight - Operating @ 7000kg.
Transmission - Clark powershift, 3 speeds forward & reverse with 4-wheel drive
Axles - Planetary type
Brakes - Service brake :Hydraulically powered, two-circuit oil immersed multidisk brakes in both axles.
Safety / Parking brake - Hydraulically released fail-safe-type brake.
Steering - Hydraulic frame steering, Orbital type frame articulation +/- 40deg
Hydraulics - 175 bars, 110 l/min/2500rpm.
Engine - Deutz F6L 912W - 65kW/2500rpm.
|
|
|
|
____________________________________________________________________________________________________________________
|
|
|
|
Multimec
Multimec 1000
Dimensions - length 7680, Width 20000mm, Height 2250mm, Wheel base 3650mm, Track 1650mm.
Weight - Operating @ 9500kg.
Transmission - Dana Spicer powershift, 3 speeds forward & reverse with 4-wheel drive
Axles - Planetary type rear axle fixed, Front axle oscillation +/- 10deg
Brakes - Service brake :Hydraulically powered, two-circuit oil immersed multidisk brakes in both axles.
Safety / Parking brake - Hydraulically released fail-safe-type brake.
Steering - Hydraulic frame steering, Orbital type frame articulation +/- 40deg
Hydraulics - 190 bars, 100 l/min/2300rpm.
Engine - Deutz BF4M 1013C - 112kW/2300rpm.
|
|
|
|
|
|
